Cryptosporidium Parvum Antigen Rapid Test

• Customization: Available
• Type: Detection Card
• Syringe: None
• Model NO.: HCRY031G
• Breathing Pattern: None
• Animal Anesthesia Machine Control Method: None
• Assay Time: 5-10 Minutes
• Delivery Time: 3~5days After Get Payment
• Payment: T/T, Western Union, Paypal
• Customized: Accpet
• Transport Package: Carton
• Specification: 10Tests/Kit
• Trademark: PETX
• Origin: Hangzhou
• HS Code: 38220010
• Production Capacity: 5000000PCS/Year

Product Description

INTENDED USE
Cryptosporidium Parvum Antigen Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of Cryptosporidium parvum antigen in human stool specimen. The test results are intended to aid in the diagnosis of Cryptosporidium parvum infection and to monitor the effectiveness of therapeutic treatment.

MATERIALS

Materials Provided

Individually packed test devices	Package insert
Disposable pipettes	Sample bottle

Materials Required but Not provided

Specimen collection container

Timer

 

TEST PROCEDURE

Bring tests, specimens, and/or controls to room temperature (15-30°C) before use.

1. Remove the test from its sealed pouch, and place it on a clean, level surface. Label the device with patient or control identification. For best results the assay should be performed within one hour.
2. SPECIMEN PREPARATION

Unscrew the sample bottle, use the attached applicator stick attached on the cap to transfer small piece of stool (4-6 mm in diameter; approximately 50 mg - 200 mg) into the sample bottle containing specimen preparation buffer . For liquid or semi-solid stools, add 100 microliters of stool to the vial with an appropriate pipette. Replace the stick in the bottle and tighten securely. Mix stool sample with the buffer thoroughly by shaking the bottle for a few seconds.

1. ASSAY PROCEDURE

3.1 Hold the sample bottle upright with the tip point toward the direction away from the test performer, snap off the tip.
3.2. Hold the bottle in a vertical position over the sample well of the test card, deliver 3 drops (120-150 μL) of diluted stool sample to the sample well (S) and start the timer.
Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area.
As the test begins to work, color will migrate across the result area in the center of the device.
3.3. Wait for the colored band(s) to appear. Read the result between 5 - 10 minutes. A strong positive sample may show result earlier.
Do not interpret the result after 10 minutes.
As the test begins to work, color will migrate across the result area in the center of the device.

 

        INTERPRETATION OF RESULTS            

    

• POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).
  NEGATIVE: Only one colored band appears in the control region (C). No apparent colored band appears in the test region (T).
  INVALID: Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.

PERFORMANCE CHARACTERISTICS
Table: Cryptosporidium Parvum Antigen Rapid vs. Reference reagent

Method		Reference reagent		Total Results
Cryptosporidium Parvum Antigen Rapid Test	Results	Positive	Negative
	Positive	125	2	127
	Negative	1	176	177
Total Result		126	178	304

Relative Sensitivity: 99.21% (95%CI: 95.66%~99.98%)  
Relative Specificity: 998.99% (95%CI:96.00%~99.86%) 
Accuracy: 99.01% (95%CI:97.14%~99.80%)